The 100W amplifier is more than powerful enough for the smaller room. Should some exceptionally loud signal threaten overload, the normal annoying distortion effects are tamed by our Bass Overload Suppression System circuitry.

The ASW300 accepts line level and speaker level inputs and has a choice of equalisation, enabling the response to be tailored to your room.

Technical Specifications : ASW 300
Description	Active vented-box subwoofer system
Dimensions	Height: 405mm (16 in) including fixed feet Width: 330mm (13 in) Depth: 375mm (14.8 in) including grille and controls Allow extra 50mm (2 in) clearance at rear for ventilation
Net Weight	15kg (33 lb)
Freq. Response	-3dB 27Hz - 150Hz adjustable (EQ at A)
Freq. Range	-6dB at 27Hz and 180Hz adjustable (EQ at A)
Drive Units	Unit 1: 1x 200mm (8 in) dia paper/Kevlar cone long throw Unit 2: Unit 3:
Finish	Cabinet: Black Ash or Maple vinyl Grille: Black cloth
Sub Woofer Amplifier	Description: Class B Power Output: 100W continuous Rated Power Consumption: 140W Input Impedance: 22k ohms Signal Noise: >90dB Functions: Volume level - Low-pass filter frequency - Low-pass filter bypass - Bass roll-off alignment - Auto sense on/standby - Phase 0/180 Inputs: Line In (RCA Phono) Speaker level In (binding posts) Outputs: Line Out (RCA Phono, high-passed) Link Out (RCA Phono, parallel to Line In) Speaker level out (binding posts, high-passed)
Low Pass Filter	Active 2nd-order, variable cut-off frequency
High Pass Filter	Line level: Active 3rd-order at 80Hz Speaker level: Passive 1st-order at 80Hz into 8 ohm resistor (Response of passive filters dependent on load impedance)