The ASW600 is the ideal partner to 600 Series speakers in smaller rooms.

The 250mm (10 in) driver employs an extremely rigid cone to withstand the considerable forces generated by dynamic bass signals and the integral 150W amplifier, features our Bass Overload Suppression System circuitry to avoid the annoying distortion effects that might normally occur should some unexpectedly loud signal threaten to overload the subwoofer.

The ASW600 can accept both line level and speaker level inputs and has a choice of equalisation, enabling the response to be tailored to your room.

Technical Specifications : ASW 600
Description	Active closed-box subwoofer system
Dimensions	Height: 365mm (14.4 in) not including removable spike feet Width: 365mm (14.4 in) Depth: 450mm (17.7 in) including grille and controls Allow extra 50mm (2 in) clearance at rear for ventilation
Net Weight	19.5kg / 43 lb
Freq. Response	-3dB 26Hz – 33/150Hz adjustable (EQ at A)
Freq. Range	-6dB 22Hz – 40/180Hz adjustable (EQ at A)
Drive Units	Unit 1: 250mm (10 in) dia paper/Kevlar® cone long-throw Unit 2: Unit 3:
Finish	Cabinet: Black Ash or Sorrento (light oak) vinyl Grille: Black Cloth
Sub Woofer Amplifier	Description: Class B Power Output: 150W continuous Rated Power Consumption: 220W Input Impedance: 22kohms Signal Noise: 90dB Functions: Volume level - Low-pass filter frequency - Low-pass filter bypass - Bass roll-off alignment - Phase 0/180 - Auto sense on/standby Inputs: Line In (RCA Phono) Speaker Level In (binding posts) Outputs: Line Out (RCA Phono, high-passed) Link Out (RCA Phono, parallel to Line In) Speaker Level Out (binding posts, high-passed)
Low Pass Filter	Active 2nd-order, variable cut-off frequency
High Pass Filter	Line level: Active 3rd-order at 80Hz Speaker Level: Passive 1st-order at 80Hz into 8 ohm resistor (Response of passive filters dependent on load impedance)