Designed to partner the 803D, and even the 802/801/800 models when space restrictions preclude the larger HTM1D, the HTM2D features the phenomenal diamond dome tweeter in a full 3-way centre speaker. In the main Matrix™ cabinet, the Kevlar® cone FST™ midrange driver is accompanied by two 180mm (7 in) bass drivers, their Rohacell® sandwich cones combining with twin, rear-facing Flowports™ to ensure great dynamics and control.

Thanks to its magnetic shielding, the HTM2D can be placed close to CRT-based TVs and rear projectors, on either a custom shelf or the FS-HTM floor stand. This stand supports the speaker at a height low enough to allow the use of large projector screens that come to within 60cm (2 ft) of the floor and has zero, 4 or 8 degrees of tilt back so that the speaker can be directed towards the listeners.

Technical Specifications : HTM2D
Description	3-way magnetically shielded vented-box system
Dimensions	Height: 329mm (13 in) Width: 841mm (33.1 in) Depth: 387mm (15.2 in)
Net Weight	31kg (68 lb)
Freq. Response	41Hz - 28kHz ±3dB on reference axis
Freq. Range	-6dB at 35Hz and 33kHz
Sensitivity	90dB spl (2.83V, 1m)
Normal Impedance	8 ohms (minimum 3.1 ohms)
Power Handling	50W - 300W into 8 ohms on unclipped programme
Drive Units	Unit 1: 1x 25mm (1 in) diamond dome high-frequency Unit 2: 1x 150mm (6 in) woven Kevlar® cone FST midrange Unit 3: 2x 180mm (7 in) Rohacell® cone bass
Finish	Cabinet: Real wood veneers of Cherrywood, Rosenut or Black Ash Grille: Black cloth
Dispersion	Description: Within 2dB of reference response Horizontal: over 60º arc Vertical: over 10º arc
Harmonic Distortion	2nd and 3rd harmonics (90dB, 1m) <1% 80Hz - 100kHz <0.5% 100Hz - 100kHz
Crossover Frequency	350Hz, 4kHz
Max. Recommended Cable Impedance	0.1 ohms