Bowers & Wilkins LCR60 S3 2 1/2 Way Shielded Center Channel Speaker

This is the smaller of two LCR (Left, Center, Right) models in the range and, like all speakers intended for center channel use, is magnetically shielded to avoid television picture distortion. This feature is essential should you need to mount either the left or right front speaker close to the television too.

The symmetrical design lends itself to use with the drivers either horizontally or vertically in line. Typically, horizontal orientation would be used in centre speaker applications, where the low profile sits well on top of or directly beneath a television, or if you need to suspend the speaker tilted down from the ceiling. In most other situations, vertical orientation is usually more appropriate.

The twin 130mm (5½-in) drivers allow the LCR60 S3 to match the output capability of the smaller models in the range - DM600 S3, DM601 S3, DM602 S3 and DM602.5 S3 – for which it is the recommended centre speaker. Alternatively, the LCR60 S3 can be used in all front and surround positions of a home theatre for a perfectly matched installation.

Technical Specifications : LCR60 S3
Description	2½-way vented-box system with magnetic shielding
Dimensions	Height: 175mm (6.9in) Width: 460mm (18.1in) Depth: 305mm (12.2in)
Net Weight	9.0kg / 19.8lb
Freq. Response	70Hz - 22kHz ± 3dB on reference axis
Freq. Range	-6dB at 55Hz and 42kHz
Sensitivity	88dB spl (2.83V 1m)
Normal Impedance	8 ohms (minimum 3.0 ohms)
Power Handling	25W - 120W into 8 ohms on unclipped programme
Drive Units	Unit 1: 1x 25mm (1in) metal dome high-frequency Unit 2: 1x 130mm (5½-in) woven Kevlar® cone bass/midrange Unit 3: 1x 130mm (5½-in) woven Kevlar® cone bass
Finish	Cabinet: Black Ash or Sorrento (light oak) vinyl Grille: Black Cloth
Dispersion	Description: Within 2dB of response on reference axis Horizontal: over 20° arc Vertical: over 40° arc (Units horizontally in line)
Harmonic Distortion	2nd & 3rd harmonics<1% 70Hz - 20kHz (90dB spl, 1m)
Crossover Frequency	400Hz, 4kHz
Max. Recommended Cable Impedance	0.1 ohms