Denon AVR1910 7.1 CH 630W Home Theater Receiver

Denon AVR-1910-Extended Information:

• 90 watts x 7 into 8 ohms (20-20,000 Hz) at 0.08% THD
• Dolby® TrueHD, DTS-HD™ Master Audio, Dolby® Digital Plus, DTS-HD™ High Resolution Audio, Dolby® Digital EX, DTS-ES™, Pro Logic® IIz, and DTS Neo:6 decoding
• Audyssey Laboratories' MultEQ® six-point auto setup and room calibration system (microphone included)
• SIRIUS satellite radio capable
• iPod® integration
• Compressed Audio Restorer for better sound with compressed music sources like MP3 files
• Audyssey Dynamic Volume mode to keep listening levels steady
• Audyssey Dynamic EQ™ for fuller sound at lower listening levels
• dual-room/dual-source audio (powered and line-level stereo audio output for 2nd room; using powered 2nd-room output allows 5.1 home theater in main room)
• high-current, low-impedance amplifier design
• Pure Direct modes switch off all unused circuitry for the cleanest possible sound
• 192kHz/24-bit digital-to-analog converters for all channels
• on-screen display for easier system setup and operation
• multibrand remote
• 17-1/8"W x 5-13/16"H x 16-1/4"D
• warranty: 2 years

Connections:

• 1080p-compatible HDMI digital video switching (4 in, 1 out)
• analog-to-HDMI video upconversion (up to 1080p) with Anchor Bay Technologies video processing and scaling
• HDMI version 1.3a with support for Deep Color, 1080/24p video, 7.1 uncompressed 24/96 audio, and HDMI-CEC
• HDMI-to-HDMI video conversion with scaling up to 1080p resolution
• component video switching (2 in, 1 out)
• component video conversion (composite and S-video to component)
• digital audio inputs: 2 optical, 2 coaxial
• digital audio outputs: 1 optical
• 4 audio/video inputs, including:
  • 1 front-panel input with composite video
  • 3 rear-panel inputs with composite and 1 S-video input
• 2 audio-only inputs
• 7.1-channel analog audio preamp input
• 2 sets of main speaker outputs
• back surround speaker channels re-assignable for bi-amping front left and right speakers